Cuprinol Garden Shades Paint for Gardens - Cool Marble 2.5L

Product Information

A. Absolutely! Cuprinol Garden Shades is suitable for any garden structure including summerhouses and log cabins. If it's a bare wood structure, new or old, its probably worth treating it with a wax free wood preservative first to protect the wood from mould, algae and fungi. Allow this to fully dry before painting. Its important than any preservative used is wax free otherwise the paint may not adhere to the structure. Apply in dry conditions, above 5 degrees Celsius and when bad weather is not forecast, minimum of 2 coats required. The final colour will vary depending on the surface and number of coats. If adhesion is inadequate on previous coatings, lightly sand before application. Make sure wood has been pre treated with appropriate wood preserver to prevent wood and decay. A. It's important that you use a wood preservative that doesn't contain wax, oil or silicone as these will prevent the paint from penetrating and adhering to the wood. Wood preservers that are advertised as being waterproof and resistant to weathering often contain wax, oil, silicone or a combination of these.

Please note that during particularly busy periods, it may take a little longer to receive your delivery and our carrier may attempt to deliver to you on a Saturday. Faster Delivery Please note some larger products are delivered to kerb-side (the street outside your home), it is at the drivers discretion if they can deliver the item to another location on the property. A. It depends on how long ago your shed and fence panels where oiled. Cuprinol Garden Shades paint is a water based product so any remaining oil or wax from previous treatments will likely repel the paint. If the timber hasn't been treated for a couple of years it may be OK. In situations like this we always recommend a test area before starting the main project to test adhesion.Any overspray should be cleaned up immediately (whilst still wet) with water and household detergent

MINIMUM OF 2 COATS REQUIRED. SUBSEQUENT COATS MUST BE APPLIED ON THE SAME DAY NO LONGER THAN 8 HOURS APART. IF NOT POSSIBLE, LIGHTLY SAND DOWN SURFACES BEFORE RECOAT TO ENSURE ADHESION.Shake contents of the tin thoroughly before decanting into Cuprinol Spray and Brush sprayer (not suitable for use with the Cuprinol Power Sprayer) Larger items over 30kg can only be delivered Monday to Friday. Please allow up to two working days for these deliveries.