sourcingmap Torx Magnetic Screwdriver, T15 Security Star Screw Driver w 4 Inch CR-V Shaft and Clear Red Handle

Product Information

Using a Torx Bit Sizes Chart is a great way to know which size to buy for a specific fastener. The chart can help you understand the difference between metric and SAE, and can also tell you what size is a good fit for the job at hand. It can also help you choose between an external Torx and an inverted Torx. Torx Bit Sizes Chart

AudiTorx is a tamper-proof fastener where a convex and smooth fastener head is topped with a break-away Torx drive that snaps off when the engineered torque is reached, leaving a rivet-like bolt head that cannot be easily removed. The main application for these fasteners is in the railroad industry. [29] External (inverted) Torx [ edit ] External Torx driverThe most common sizes are T10 and T25. The head height is 0.062 inch (1.6 mm). The head diameter is 0.50 inch (1.27 cm). Some other specialized sizes include T55 and T27. TORX PLUS Long arm L-Keys". Wiha Tools USA. Archived from the original on 7 October 2015 . Retrieved 14 July 2016. If you need to know which size of Torx is the right one for a specific project, take a look at the Torx bit sizes chart. It will tell you which Torx bits are compatible with which screws. KC Tool

Sharke, Paul (June 2005). "Fast and Secure: how much proof is tamperproof?". Mechanical Engineering. 127 (6): 32. doi: 10.1115/1.2005-JUN-2. ISSN 0025-6501. Archived from the original on 2007-02-09 . Retrieved 2012-01-14. {{ cite journal}}: CS1 maint: bot: original URL status unknown ( link) Torx screws are commonly found on automobiles, motorcycles, bicycle brake systems ( disc brakes), hard disk drives, computer systems and consumer electronics. Initially, they were sometimes used in applications requiring tamper resistance, since the drive systems and screwdrivers were not widely available; as drivers became more common, tamper-resistant variants, as described below, were developed. [4] Torx screws are also becoming increasingly popular in construction industries. The metric system is a good fit for larger distances. It is not as accurate for smaller distances. Tamper-Proof Torx keys are measured in Torx metrics because of the design. The sizes can range from T1 to T100, however, the most common sizes are: The TORX(r) drive system has several benefits, including an easy solution to a common fastener problem, higher productivity, and enhanced reliability. You can also reduce total assembly costs by using the TORX(r) Drive System. SAE vs metric equivalents

Torx Bit Sizes Chart

The Torx Plus, also known as the Internal Plus, is an improved version of the original design. This version is designed to provide better torque transfer than the original design. The lobes on the screw allow for increased torque without causing much wear on the tool. By design, Torx head screws resist cam out better than Phillips head or slot head screws. [1] Whereas the tendency of Phillips drivers to cam out under excessive torque has been listed as a feature preventing damage to the screw-head or driver, [5] Torx heads were designed to prevent cam-out. The development of better torque-limiting automatic screwdrivers for use in factories allowed this change. Rather than rely on the tool to slip out of the screw head when a desired torque level is reached (which risks damage to the driver tip, screw head, or workpiece), torque-limiting driver designs achieve a desired torque consistently. For the Torx type of design, the angle is much closer to 90° than in the case of the hex head, and so for a given torque the potentially damaging radial force is much lower. This property allows the head of the fastener to be smaller for the same required torque, which can be an advantage in applications where space to accommodate the head is limited. The Torx Plus drive system is another variation of the Torx. It is also known as External Plus. The lobes are more square than the original design. This design allowed for higher torque on the head. The Torx Plus also has five-lobed tamper-resistant variants. This design requires the right tools.

Torx Paralobe is a further developed Torx Drive System with 6% longer Flanks which results in a 20% higher applicable torque. [15] Torx Plus [ edit ] Torx Plus head pattern Technical Information on Fasteners: Design recommendations 11.1 Inside drives for screws – AW drive (AW-Antrieb)" (PDF). Adolf Würth GmbH & Co. KG . Retrieved 2 March 2017. T-shaped - different varieties of t-handle Torx keys are available however, the main benefit of using this type of Torx key is that a great amount of torque and leverage can be applied.The metric system is more widely used in other countries. In the United States, the Imperial system is still used. It is based on the Roman Empire's system, which considered one foot to be the length of a human being. This means that the same tool in metric units won't fit an Imperial nut. AW drive is a hexalobular-type screw head similar to Torx, with a tapered profile to aid in centering, developed by the Würth Group in Germany. [30] It is available in five sizes: AW10, AW20, AW25, AW30 and AW40. [31] Gallery [ edit ]

TS Star Bits (5 Sided) 1/4"D 7pc - Part No. 3389 - Part of the TS Star/Torx* Plus range from Laser Tools" . Retrieved 14 July 2016. The metric system is also the standard for airplanes and boats. To make the process of repairing vehicles easier, the SAE standardized the measuring system. It's also been adopted by major vehicle manufacturing hubs in other countries. A Torx successor, Torx Plus, was introduced around 1990 when the original Torx patent was expiring. The Torx Plus patent subsequently expired in 2011. [16] [17] The lobes are more square to allow for higher torque and to minimize wear. The name is shortened to IP (Internal Plus) with sizes ranging from 1IP to 100IP [18] (sometimes listed as IP1 to IP100 [19]) and EP (External Plus) with sizes ranging from 1EP to 42EP as well as smaller sizes ranging from H7EP to H2EP and includes five-lobed tamper-resistant variants. [18] The specifications for these licenses are held by Textron. Standard Torx drivers can be used to drive Torx Plus screws, but not to full torque because of the loose fit. Torx Plus drivers will not fit into standard Torx screws.

What is a Torx key?

Torx (pronounced / t ɔːr k s/) is a trademark for a type of screw drive characterized by a 6-point star-shaped pattern, developed in 1967 [1] by Camcar Textron. [a] A popular generic name for the drive is star, as in star screwdriver or star bits. The official generic name, standardized by the International Organization for Standardization as ISO 10664, is hexalobular internal. [2] This is sometimes abbreviated in databases and catalogs as 6lobe (starting with the numeral 6, not the capital letter G). Torx Plus, Torx Paralobe and Torx ttap are improved head profiles. [3]