3DLAC spray adhesive for perfect adhesion to the 3D printer print bed, 400 ml

Product Information

One where our 2D thoughts are turned into 3D realities and where you have full control of your creative experiments, with a little help from an online expert community that loves to share what we do. Finance is only available to permanent UK residents aged 18+, subject to status, terms and conditions apply. If the removal is problematic, the part with the base can be placed in a fridge and the piece will be released only with a light touch. It is absolutely crucial to keep in mind that if air shipment is required, the 3DLac Stick should be purchased as it is safe and therefore viable for air shipment without restrictions. is constantly investigating how to improve the formula of the product to achieve greater adhesion to the base, hence the formula currently used is an improved version compared to the first.

After the printing, wait until the heated base is below 30 °C, the adhesion will be lighter and without tools (depending on the characteristics and dimensions of the part) may remove the piece gently and without damage. We pride ourselves in our commitment to bringing this fantastic technology to thousands of innovative new adopters, all with excellent service along your journey. Our unique formula is designed to deliver outstanding results, ensuring your creations stand out with unparalleled accuracy and durability. PrinterMods is a proud cog in that machine - supplying the maker community with what they need to grow and thrive.Depending on the materials will be obtained different adhesions, so we advise before printing large parts with certain technical materials are pre-tested. Prima, trading since 2014 are one of Europe's largest resellers and distributors of 3D Printers and associated products.

To use this product you only need to press the applicator against the printing surface for a couple of seconds and once the adhesive flows, it spreads a light layer of product over the printing area. A product capable of fixing what was needed in each part of the printing process and which meets our conditions was essential. Tip: Before you remove the printed parts or the print model from the plate, wait until the temperature drops below 30 °C! In our experience, the the first time you use 3DLAC on your build surface apply two light coats (remember to shake the bottle before spraying).When our filament users asked what we recommend for bed adhesion, we would always suggest this product.

With the stick you can easily lubricate various surfaces, so that your printed object is perfectly adhered in place.It should always be applied on a clean and dry surface by gently pressing the applicator against the printing surface for a few seconds until the product starts flowing.

Plus spray adhesive in a practical pump spray bottle based on thermoplastic copolymers for the 3D printing FFF or FDM technology. The function of 3DLAC is to provide a firm and durable adhesion of the filament to the base, avoiding the movement of the piece on the first layers and eliminating warping (lifting of the sides). Proper adhesion of the extruded material to the 3D printing base is a crucial factor in successful 3D prints as it helps prevent layer misplacement, warping and deformations.We started printing right back in 2014 and have tried every trick in the book when it comes to bed adhesion. P501 - Dispose of contents/container in accordance with local/regional/national/international regulations. PayPal Credit and PayPal Pay in 3 are trading names of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH.